POWER TEAM · 50 t
Master Pin PushersHTPP-50
50 t of force at a weight of 85 kg. Four tool sets for pin diameters from 19.3 to 36.4 mm. The smallest HTPP model has a 250 mm stroke and a 273 mm clear opening.
Dimensions, equipment and tooling ranges for your technical selection.
HTPP series product image; configuration varies by model.
Compare technical specifications
PDF ↓| Dimensions, equipment and tooling ranges for your technical selection. | HTPP-50 |
|---|---|
| Pressing force [t] | 50 |
| Stroke [mm] | 250 |
| Operating pressure [bar] | 700 |
| Effective piston area [cm²] | 70.88 |
| Oil volume [cm³] | 1,772 |
| A · Clear opening [mm] | 273 |
| B · Throat depth [mm] | 65 |
| C · Overall length [mm] | 1,400 |
| D · Overall height [mm] | 320 |
| E · Overall width [mm] | 270 |
| Tool sets | 4 |
| Weight [kg] | 85 |
Source: Power Team HTPP product information, PT_HTPP_0726_US. Subject to technical changes.
Tool sets and pin diameters
The ranges of sets 1 and 2 overlap on HTPP-50 and HTPP-100 in the source document. WSD checks the appropriate set for your application.
| Set | Pin diameter [mm] |
|---|---|
| 1 | 19.3–23.7 |
| 2 | 23–30.1 |
| 3 | 30.1–33.2 |
| 4 | 33.2–36.4 |
Check suitability, setup and tooling before use. Follow operating instructions and machine or track manufacturer requirements. Operation by instructed personnel.
Track types ↗FROM TOOL TO SYSTEM
Everything working together.
The press is the starting point. WSD matches the hydraulics and accessories to your application.
The HTPP manufacturer package
- Hydraulic cylinder and press frame
- Standard tool sets for each model
- Low-height cylinder and spacer set
- Storage case
Your matched WSD set
- Suitable pump for double-acting cylinders
- Matched hoses and couplings
- Pressure gauge
- Transport case and tooling by arrangement
The standard HTPP package does not include a pump or hoses. WSD can specify them as part of your complete set.
Power Team pumps, hoses & accessories↗FAQ
Good questions. Clear answers.
01Which track pin pusher fits my machine?
Pin diameter and length, track geometry, available space and required force are decisive. Send WSD the machine model, photographs and dimensions. Machine weight alone is not enough to select the press.
02Are the pump and hoses included?
The manufacturer package does not include the pump or hoses. WSD can supply a matched set with suitable pump, hoses, couplings, pressure gauge and transport equipment.
03Which hydraulic pump is needed?
A suitable pump for double-acting cylinders is required. Pressure, valve function, oil capacity, hoses and couplings must match the HTPP model. WSD helps specify the system.
Contact
Your machine. Our next task.
Tell us about your application. Photographs, pin dimensions or a drawing help us give more specific advice.
New WSD premises from November 2026
Hauptstraße 115
66578 Schiffweiler